The 802.1X Authenticator Router App initiates the hostapd service on specified Ethernet ports, thereby creating a security barrier for network traffic. All incoming and outgoing traffic is temporarily blocked, with the exception of MAC addresses that successfully complete the 802.1X authentication protocol. This App enhances network security by ensuring only authenticated devices gain access to the network resources. It is a crucial component for enterprises looking to implement a robust, secure networking environment.

eth1x_auth.v3.tgz | 13 KB V3

eth1x_auth.v4.tgz | 13 KB V4

eth1x_auth.v2i.tgz | 13 KB V2i

eth1x_auth.v4i.tgz | 13 KB V4i

802.1X_Authenticator_Application_Note_20231010.pdf | 471 KB

The Band Select Router App enables users to customize the range of frequency bands supported by our routers. By limiting the frequency bands, you can optimize network performance and better align with specific carrier or regional requirements. This feature is particularly useful in environments where network congestion is an issue or when adhering to regulatory limitations on frequency usage. It offers a tailored networking experience by giving you more control over your router's connectivity options.

[Limited to specific router models]

bandsel.v3.tgz | 32 KB V3

bandsel.v4.tgz | 31 KB V4

bandsel.v2i.tgz | 32 KB V2i

bandsel.v4i.tgz | 31 KB V4i

BandSelect_Application_Note_20240918.pdf | 778 KB

The Bluetooth Router App incorporates Bluez 5 and D-Bus to provide comprehensive Bluetooth functionality for your router. The Bluetooth is very useful for communication with the IoT sensors via the Bluetooth Low Energy (BLE) protocol. With this RouterApp, it is also possible to easily pair the Bluetooth devices with your router and then use the Bluetooth networking (PAN) to provide a LAN and/or internet access for these devices.

[Limited to specific router models]

bluetooth.v3.tgz | 2 MB V3

bluetooth.v4.tgz | 2 MB V4

bluetooth.v4i.tgz | 2 MB V4i

Bluetooth_Application_Note_20240130.pdf | 3 MB

The Ethernet Mirroring Router App serves as a tool for port mirroring, allowing for the monitoring and analysis of both incoming and outgoing network traffic. This is especially useful during point-to-point (P2P) testing with Remote Terminal Units (RTUs) as well as for troubleshooting network issues. The app ensures that you can maintain close surveillance of your network's data packets for performance optimization or security audits. This app is compatible with firmware versions 6.1.8 and above, providing an essential utility for network administrators and engineers.

eth_mirror.v3.tgz | 11 KB V3

eth_mirror.v4.tgz | 12 KB V4

eth_mirror.v2i.tgz | 11 KB V2i

eth_mirror.v4i.tgz | 12 KB V4i

Ethernet_Mirroring_Application_Note_20231010.pdf | 415 KB

The Layer 2 Firewall (L2FW) Router App provides a robust security layer by enabling MAC address-based filtering. This app allows you to create a defined list of authorized MAC addresses, effectively controlling which devices are granted network access. This targeted filtering is especially useful for securing sensitive areas of your network or for restricting device access in a Bring Your Own Device (BYOD) environment. 

l2fw.v3.tgz | 11 KB V3

l2fw.v4.tgz | 11 KB V4

l2fw.v2i.tgz | 11 KB V2i

l2fw.v4i.tgz | 11 KB V4i

Layer_2_Firewall_Application_Note_20231013.pdf | 434 KB

The NAT Router App significantly enhances the native NAT configuration capabilities of your router by introducing SNAT (Source Network Address Translation) and DNAT (Destination Network Address Translation) options. This app significantly expands the number of definable SNAT and DNAT rules, providing a high level of granularity and control over your network's traffic routing. 

nat.v3.tgz | 15 KB V3

nat.v4.tgz | 15 KB V4

nat.v2i.tgz | 15 KB V2i

nat.v4i.tgz | 15 KB V4i

NAT_Application_Note_20240808.pdf | 745 KB

The PPP Gateway Router App facilitates the establishment of a Point-to-Point Protocol (PPP) connection between the router and a device connected via a serial line. This app is designed to provide a reliable and efficient data link layer for network communications over serial connections. Whether you are integrating legacy equipment or simply prefer serial connectivity, this app makes the configuration and management straightforward. Utilize this app for seamless serial line network integration.

pppGateway.v3.tgz | 13 KB V3

pppGateway.v4.tgz | 14 KB V4

pppGateway.v2i.tgz | 13 KB V2i

pppGateway.v4i.tgz | 14 KB V4i

PPPGateway_Application_note_20231024.pdf | 591 KB

The Transparent mode Router App facilitates the seamless transfer of the mobile WAN IP address to a connected device on the ETH interface. This feature ensures that the connected device can efficiently utilize the mobile WAN IP address, simplifying network connectivity and enhancing communication capabilities.

transparentMode.v3.tgz | 12 KB V3

transparentMode.v4.tgz | 12 KB V4

transparentMode.v2i.tgz | 12 KB V2i

transparentMode.v4i.tgz | 12 KB V4i

TransparentMode_Application_Note_20241031.pdf | 597 KB

The URL Blocker feature empowers users to effectively block access to specific domains (URLs) for connected devices. By configuring this functionality, you can enhance network security and control access to websites, ensuring a safer and more focused online experience for users.

url_blocker.v3.tgz | 711 KB V3

url_blocker.v4.tgz | 723 KB V4

url_blocker.v2i.tgz | 724 KB V2i

url_blocker.v4i.tgz | 723 KB V4i

URL_Blocker_Application_Note_20231027.pdf | 486 KB

The WiFi SSID Switch Router App empowers your router to seamlessly switch between up to four SSIDs, offering enhanced flexibility and connectivity options for your WiFi networks. This feature ensures that your router automatically connects to the most suitable SSID, optimizing your wireless network experience.

[Limited to specific router models]|

wifi_ssid_switch.v3.tgz | 28 KB V3

wifi_ssid_switch.v4.tgz | 28 KB V4

wifi_ssid_switch.v2i.tgz | 28 KB V2i

wifi_ssid_switch.v4i.tgz | 28 KB V4i

WiFi_SSID_Switch_Application_Note_20231027.pdf | 644 KB

The WiFi STA Relay Router App enables transparent mode on your router, configuring the WiFi interface in client mode and bridging it to the Ethernet interface (ETH). This setup allows for seamless communication between devices connected to the router's WiFi interface and those on the Ethernet network, providing a versatile networking solution.

[Limited to specific router models]

wifi_relay.v3.tgz | 126 KB V3

wifi_relay.v4.tgz | 129 KB V4

wifi_relay.v2i.tgz | 126 KB V2i

wifi_relay.v4i.tgz | 129 KB V4i

WiFi_STA_Relay_Application_Note_20231027.pdf | 498 KB

The 802.1X Authenticator Router App initiates the hostapd service on specified Ethernet ports, thereby creating a security barrier for network traffic. All incoming and outgoing traffic is temporarily blocked, with the exception of MAC addresses that successfully complete the 802.1X authentication protocol. This App enhances network security by ensuring only authenticated devices gain access to the network resources. It is a crucial component for enterprises looking to implement a robust, secure networking environment.

eth1x_auth.v2.tgz | 12 KB V2V2i

eth1x_auth.v3.tgz | 12 KB V3

eth1x_auth.v4.tgz | 12 KB V4

802.1X_Authenticator_Application_Note_20231010.pdf | 471 KB

The Backup APN Router App provides users with the flexibility to designate both a Primary and Backup Access Point Name (APN) for the router's first SIM card. This feature enhances network resilience by automatically switching to the Backup APN in scenarios where the connection to the Primary APN fails or is not established within a specified timeframe. This automatic failover capability ensures uninterrupted data transmission and maximizes uptime, making it an essential tool for mission-critical applications and remote deployments.

backup_apn.v2.tgz | 11 KB V2V2i

backup_apn.v3.tgz | 11 KB V3

backup_apn.v4.tgz | 11 KB V4

Backup_APN_Application_Note_20231010.pdf | 456 KB

The Band Select Router App enables users to customize the range of frequency bands supported by our routers. By limiting the frequency bands, you can optimize network performance and better align with specific carrier or regional requirements. This feature is particularly useful in environments where network congestion is an issue or when adhering to regulatory limitations on frequency usage. It offers a tailored networking experience by giving you more control over your router's connectivity options.

[Limited to specific router models]

bandsel.v2.tgz | 28 KB V2V2i

bandsel.v3.tgz | 28 KB V3

bandsel.v4.tgz | 28 KB V4

BandSelect_Application_Note_20231123.pdf | 768 KB

The Bluetooth Router App incorporates Bluez 5 and D-Bus to provide comprehensive Bluetooth functionality for your router. The Bluetooth is very useful for communication with the IoT sensors via the Bluetooth Low Energy (BLE) protocol. With this RouterApp, it is also possible to easily pair the Bluetooth devices with your router and then use the Bluetooth networking (PAN) to provide a LAN and/or internet access for these devices.

[Limited to specific router models]

bluetooth.v3.tgz | 1 MB V3

Bluetooth_Application_Note_20231010.pdf | 2 MB

With Bondix S.A.NE Enterprise Router App, two or more WAN connections can be aggregated to achieve higher bandwidth as well as higher availability.
The Bondix S.A.NE Enterprise uses bonding technology to optimize the speed and latency overall connections.

https://www.lucom.de/bondix-advantech.html  V2V3V4V2i

The Ethernet Mirroring Router App serves as a tool for port mirroring, allowing for the monitoring and analysis of both incoming and outgoing network traffic. This is especially useful during point-to-point (P2P) testing with Remote Terminal Units (RTUs) as well as for troubleshooting network issues. The app ensures that you can maintain close surveillance of your network's data packets for performance optimization or security audits. This app is compatible with firmware versions 6.1.8 and above, providing an essential utility for network administrators and engineers.

eth_mirror.v2.tgz | 11 KB V2V2i

eth_mirror.v3.tgz | 11 KB V3

eth_mirror.v4.tgz | 11 KB V4

Ethernet_Mirroring_Application_Note_20231010.pdf | 415 KB

The Layer 2 Firewall (L2FW) Router App provides a robust security layer by enabling MAC address-based filtering. This app allows you to create a defined list of authorized MAC addresses, effectively controlling which devices are granted network access. This targeted filtering is especially useful for securing sensitive areas of your network or for restricting device access in a Bring Your Own Device (BYOD) environment. 

l2fw.v2.tgz | 10 KB V2V2i

l2fw.v3.tgz | 10 KB V3

l2fw.v4.tgz | 10 KB V4

Layer_2_Firewall_Application_Note_20231013.pdf | 434 KB

The NAT Router App significantly enhances the native NAT configuration capabilities of your router by introducing SNAT (Source Network Address Translation) and DNAT (Destination Network Address Translation) options. This app significantly expands the number of definable SNAT and DNAT rules, providing a high level of granularity and control over your network's traffic routing. 

nat.v2.tgz | 15 KB V2V2i

nat.v3.tgz | 15 KB V3

nat.v4.tgz | 15 KB V4

NAT_Application_Note_20240808.pdf | 745 KB

The PPP Gateway Router App facilitates the establishment of a Point-to-Point Protocol (PPP) connection between the router and a device connected via a serial line. This app is designed to provide a reliable and efficient data link layer for network communications over serial connections. Whether you are integrating legacy equipment or simply prefer serial connectivity, this app makes the configuration and management straightforward. Utilize this app for seamless serial line network integration.

pppGateway.v2.tgz | 12 KB V2V2i

pppGateway.v3.tgz | 12 KB V3

PPPGateway_Application_note_20231024.pdf | 591 KB

The Transparent mode Router App facilitates the seamless transfer of the mobile WAN IP address to a connected device on the ETH interface. This feature ensures that the connected device can efficiently utilize the mobile WAN IP address, simplifying network connectivity and enhancing communication capabilities.

transparentMode.v2.tgz | 2 KB V2V2i

transparentMode.v3.tgz | 2 KB V3

transparentMode.v4.tgz | 2 KB V4

TransparentMode_Application_Note_20231027.pdf | 858 KB

The URL Blocker feature empowers users to effectively block access to specific domains (URLs) for connected devices. By configuring this functionality, you can enhance network security and control access to websites, ensuring a safer and more focused online experience for users.

url_blocker.v2.tgz | 188 KB V2V2i

url_blocker.v3.tgz | 184 KB V3

url_blocker.v4.tgz | 188 KB V4

URL_Blocker_Application_Note_20231027.pdf | 486 KB

The WiFi SSID Switch Router App empowers your router to seamlessly switch between up to four SSIDs, offering enhanced flexibility and connectivity options for your WiFi networks. This feature ensures that your router automatically connects to the most suitable SSID, optimizing your wireless network experience.

[Limited to specific router models]|

wifi_ssid_switch.v2.tgz | 18 KB V2V2i

wifi_ssid_switch.v3.tgz | 18 KB V3

WiFi_SSID_Switch_Application_Note_20231027.pdf | 644 KB

The WiFi STA Relay Router App enables transparent mode on your router, configuring the WiFi interface in client mode and bridging it to the Ethernet interface (ETH). This setup allows for seamless communication between devices connected to the router's WiFi interface and those on the Ethernet network, providing a versatile networking solution.

[Limited to specific router models]

wifi_relay.v2.tgz | 28 KB V2V2i

wifi_relay.v3.tgz | 28 KB V3

wifi_relay.v4.tgz | 29 KB V4

WiFi_STA_Relay_Application_Note_20231027.pdf | 498 KB