Node-RED is a programming tool for wiring together hardware devices, APIs and online services in new and interesting ways. This Router App contains Node-RED with some additional useful comon nodes. Other specialized nodes you can find in separated Router Apps.

Node-RED requires installed Node.js.

nodered.v3.tgz | 9 MB V3

nodered.v4.tgz | 9 MB V4

Node-RED_Application_Note_20231020.pdf | 7 MB

Adds a support for the AWS cloud to Node-RED. You will have the complex set of nodes for all Amazon cloud services after instalation. For detailed description see the Node-RED Application Note above.

noderedaws.v3.tgz | 2 MB V3

noderedaws.v4.tgz | 2 MB V4

Adds a support for the Azure IoT platform to Node-RED. It can connect to Azure IoT Hub, Azure IoT Central and use Azure IoT Edge as a transparant gateway. For detailed description see the Node-RED Application Note above.

noderedazure.v3.tgz | 2 MB V3

noderedazure.v4.tgz | 2 MB V4

Adds a support for the BACnet protocol to Node-RED. A router then can be part of the Building Automation and Control network and it can communicate with the BACnet devices. For a detailed description see the Node-RED Application Note above.

noderedbacnet.v3.tgz | 288 KB V3

noderedbacnet.v4.tgz | 288 KB V4

Adds a support for the Bluetooth to Node-RED. You can scan BLE devices and read/write their service characteristics. For detailed description see the Node-RED Application Note above.

noderedbt.v3.tgz | 432 KB V3

noderedbt.v4.tgz | 432 KB V4

Adds a support for the Dashboard to Node-RED. You can create GUI for your flow with this node. For detailed description see the Node-RED Application Note above.

nodereddashboard.v3.tgz | 3 MB V3V4

nodereddashboard.v4.tgz | 3 MB V4

Adds a support for the dnp3 protocol to Node-RED. Router can work as a dnp3 outstation with the datapoints and control commands support. For detailed description see the Node-RED Application Note above.

nodereddnp3.v3.tgz | 628 KB V3

nodereddnp3.v4.tgz | 651 KB V4

Adds a support for the filesystem opearations: copy, move, create link, remove, make dir, list, stats, test access. For detailed description see the Node-RED Application Note above.

noderedfs.v3.tgz | 430 KB V3

noderedfs.v4.tgz | 429 KB V4

Adds a support for the FTP and SFTP protocols to Node-RED. You can do the basic commands LIST, GET, PUT, DELETE and MKDIR on a FTP or SSH server with this node. For detailed description see the Node-RED Application Note above.

noderedftp.v3.tgz | 525 KB V3

noderedftp.v4.tgz | 525 KB V4

Adds a support for the GNSS to Node-RED. GPSd node receives the GNSS events as payload via gpsd daemon. You can filter which events you are interested in. For detailed description see the Node-RED Application Note above.

noderedgpsd.v3.tgz | 9 KB V3

noderedgpsd.v4.tgz | 9 KB V4

Adds a support for the gzip compression to Node-RED. This node compresses an open node payload or decompress a compressed node payload by gzip compression. For detailed description see the Node-RED Application Note above.

noderedgzip.v3.tgz | 259 KB V3

noderedgzip.v4.tgz | 259 KB V4

Adds a support for the KNX protocol to Node-RED. Included nodes give you the control over your KNX intallation. For detailed description see the Node-RED Application Note above.

noderedknx.v3.tgz | 790 KB V3

noderedknx.v4.tgz | 790 KB V4

Adds a support for the OMA Lightweight M2M protocol to Node-RED. It is intended for machine to machine (M2M) or Internet of things (IoT) device management and access to the device services. For detailed description see the Node-RED Application Note above.

noderedlwm2m.v3.tgz | 559 KB V3

noderedlwm2m.v4.tgz | 560 KB V4

Adds a support for the Modbus protocol to Node-RED. Both protocol varianst TCP and RTU are supported. Your roter can act as both client (Modbus master) and the server (Modbus slave). For detailed description see the Node-RED Application Note above.

noderedmodbus.v3.tgz | 529 KB V3

noderedmodbus.v4.tgz | 533 KB V4

Adds a support for the OPC UA protocol to Node-RED. Your router can act as both a client and a server with these nodes. For detailed description see the Node-RED Application Note above.

noderedopcua.v3.tgz | 4 MB V3

noderedopcua.v4.tgz | 4 MB V4

Adds a support for the PLC EtherNet/IP protocol to Node-RED. Your flow can communicate with the Allen Bradley/Rockwell PLCs over Ethernet with these nodes. For detailed description see the Node-RED Application Note above.

noderedplcethip.v3.tgz | 48 KB V3

noderedplcethip.v4.tgz | 48 KB V4

Adds a support for the PLC Melsec protocol to Node-RED. Your flow can communicate with the Mitsubishi PLCs over Ethernet with these nodes. For detailed description see the Node-RED Application Note above.

noderedplcmc.v3.tgz | 42 KB V3

noderedplcmc.v4.tgz | 42 KB V4

Adds a support for the Splunk cloud to Node-RED. Allows to publish a node payload to Splunk's HTTP Event Collector. For detailed description see the Node-RED Application Note above.

noderedsplunk.v3.tgz | 234 KB V3

noderedsplunk.v4.tgz | 234 KB V4

Node.js is a JavaScript runtime built on Chrome's V8 JavaScript engine. Node.js uses an event-driven, non-blocking I/O model that makes it lightweight and efficient.

nodejs.v3.tgz | 12 MB V3

nodejs.v4.tgz | 12 MB V4

Node.js_Application_Note_20231013.pdf | 466 KB

npm is an official tool for the Node.js node management. Advantech provides this tool but provides no support for the nodes installed via this tool. There are some limitations and risks of using this tool on embeded routers. Please read carefully the chapter 4.5 in Node-RED Application Note before use it.

npm.v3.tgz | 2 MB V3

npm.v4.tgz | 2 MB V4