To improve the user experience on this site we use cookies. I agree | I disagree

Category

Available Router Apps for category Protocol Conversion

For firmware version 6.4.0 and up.



AT Modem Emulator

Categories:Protocol Conversion
Version:1.2.1
Release date:
16.02.2024
Description:

The AT Modem Emulator Router App mimics the behavior of a traditional telephone modem, providing an interface for dial-up connectivity via the router's serial port. When a device is connected to the router's serial interface, it perceives the router as a HAYES-compatible modem and can use standard AT commands to initiate, configure, and terminate a TCP/IP connection. This emulator is capable of establishing connections not only with other instances of the AT Modem Emulator running on separate routers but also with any TCP server listening on the appropriate port. This functionality allows for seamless integration of legacy devices into modern networking environments, making it a valuable tool for both retrofits and new installations.

[Limited to specific router models]

Downloads:

atModemEmulator.v3.tgz | 28 KB V3

atModemEmulator.v4.tgz | 28 KB V4

atModemEmulator.v2i.tgz | 29 KB V2i

atModemEmulator.v4i.tgz | 28 KB V4i

AT_Modem_Emulator_Application_Note_20231010.pdf | 729 KB

DNP3 Outstation

Categories:Protocol Conversion
Version:1.4.2
Release date:
14.08.2024
Description:

The DNP3 Outstation Router App transforms your router's I/O ports into a DNP3 slave device, enabling it to communicate via the Distributed Network Protocol 3.0 (DNP3). This capability is essential for industries like utilities and energy, where DNP3 is a standard for data acquisition and control. By utilizing this App, you can integrate your router seamlessly into DNP3-based monitoring and control systems. 

Downloads:

dnpOut.v3.tgz | 45 KB V3

dnpOut.v4.tgz | 45 KB V4

dnpOut.v2i.tgz | 46 KB V2i

dnpOut.v4i.tgz | 45 KB V4i

DNP3_Outstation_Application_note_20231123.pdf | 2 MB

Modbus logger

Categories:Protocol Conversion
Version:1.3.1
Release date:
16.02.2024
Description:

The Modbus Logger Router App enables the router to interact with Modbus RTU slave devices, reading their data for further processing. Once the data is collected, the app facilitates its secure upload to an FTP or FTPS server for centralized storage and analysis. This provides an essential layer of automation for industrial environments where Modbus RTU slave devices are prevalent. The Modbus Logger ensures seamless data integration and offers a straightforward solution for remote monitoring and control of Modbus-enabled devices.

Downloads:

Modbus_Logger_Application_Note_20231020.pdf | 506 KB

Modbus to LwM2M

Categories:Protocol Conversion
Version:1.1.0
Release date:
01.03.2024
Description:

The Modbus to LwM2M Router App serves as a communication bridge between Modbus/TCP devices and devices utilizing the LwM2M (Lightweight Machine-to-Machine) protocol. By translating and routing data between these two commonly used industrial protocols, this app allows for seamless integration and data exchange within your network. Whether you're aiming to modernize your existing Modbus infrastructure or create a hybrid network environment, the Modbus to LwM2M Router App provides a reliable and streamlined solution for ensuring device interoperability and data cohesiveness.

Downloads:

ModbusToLwM2M.v3.tgz | 200 KB V3

ModbusToLwM2M.v4.tgz | 198 KB V4

ModbusToLwM2M.v2i.tgz | 215 KB V2i

ModbusToLwM2M.v4i.tgz | 198 KB V4i

Modbus_to_LwM2M_Application_Note_20240510.pdf | 538 KB

Modbus to MQTT

Categories:Protocol Conversion
Version:2.1.3
Release date:
01.03.2024
Description:

The Modbus to MQTT Router App enables effortless communication between devices using the Modbus/TCP protocol and those employing MQTT (Message Queuing Telemetry Transport). This app serves as a translator between the two protocols, facilitating real-time data exchange and interoperability. Ideal for both modern IoT applications and traditional industrial setups, the Modbus to MQTT Router App ensures that you can integrate diverse devices into a unified, efficient system without compatibility issues.

Downloads:

mb2mqtt.v3.tgz | 1 MB V3

mb2mqtt.v4.tgz | 1 MB V4

mb2mqtt.v2i.tgz | 1 MB V2i

mb2mqtt.v4i.tgz | 1 MB V4i

Modbus-MQTT_Application_Note_20240812.pdf | 629 KB

Modbus to MQTT for v1

Categories:Protocol Conversion
Version:2.1.1
Release date:
06.05.2024
Description:

The Modbus to MQTT Router App enables effortless communication between devices using the Modbus/TCP protocol and those employing MQTT (Message Queuing Telemetry Transport). This app serves as a translator between the two protocols, facilitating real-time data exchange and interoperability. Ideal for both modern IoT applications and traditional industrial setups, the Modbus to MQTT Router App ensures that you can integrate diverse devices into a unified, efficient system without compatibility issues.

Downloads:

mb2mqtt.v1.tgz | 1 MB V1

Modbus-MQTT_Application_Note_20240321.pdf | 615 KB

Packet Splitter

Categories:Protocol Conversion
Version:1.4.1
Release date:
06.02.2024
Description:

The Packet Splitter Router App enables data duplication and distribution to multiple targets, supporting up to seven different connections simultaneously. This functionality is useful for real-time data sharing across various endpoints, such as servers or other network devices. By replicating incoming data packets based on predefined settings, the App improves data efficiency, redundancy, and fault tolerance within your network. It is ideal for monitoring systems, backup processes, or multi-tiered analytics platforms.

Downloads:

packetSplitter.v3.tgz | 20 KB V3

packetSplitter.v4.tgz | 21 KB V4

packetSplitter.v2i.tgz | 21 KB V2i

packetSplitter.v4i.tgz | 21 KB V4i

Packet_Splitter_Application_note_20231024.pdf | 615 KB

Protocol ALPHA-MODBUS

Categories:Protocol Conversion
Version:1.6.1
Release date:
16.02.2024
Description:

The Protocol ALPHA-MODBUS Router App serves as a data converter that enables seamless translation from Mitsubishi ALPHA2 protocols to Modbus TCP. This app is an essential tool for integrating Mitsubishi ALPHA2 devices into a Modbus-centric network architecture. It aims to simplify the process of protocol conversion, offering a hassle-free experience for both setup and operation. Utilize this app to bridge the gap between different industrial communication protocols effectively.

Downloads:

ALPHA-MODBUS_application_note_20231024.pdf | 485 KB

Protocol DF1-Ethernet

Categories:Protocol Conversion
Version:1.3.1
Release date:
29.02.2024
Description:

The Protocol DF1-Ethernet Router App simplifies communication by converting the DF1 serial protocol into TCP/IP, enabling seamless integration of DF1-based devices into modern network infrastructures. This straightforward app streamlines the transition from serial communication to Ethernet-based connections. Its user-friendly operation and configuration make it an essential tool for optimizing network compatibility and performance. Use this app to efficiently bridge the gap between DF1 serial and TCP/IP communication protocols, ensuring reliable and efficient data transfer.

Downloads:

abcsp2df1.v3.tgz | 40 KB V3

abcsp2df1.v4.tgz | 42 KB V4

abcsp2df1.v2i.tgz | 41 KB V2i

abcsp2df1.v4i.tgz | 42 KB V4i

Protocol_DF1-Ethernet_Application_note_20231026.pdf | 541 KB

Protocol IEC101-104

Categories:Protocol Conversion
Version:1.2.4
Release date:
15.01.2024
Description:

The Protocol IEC101-104 Router App simplifies communication by converting the IEC101 serial protocol to the IEC104 IP protocol, facilitating seamless integration of IEC101-based devices into IP-based network infrastructures. This app streamlines the transition from serial communication to IP-based connections, offering a user-friendly interface for configuration and operation. It ensures reliable and efficient data transfer, making it an essential tool for optimizing network compatibility and performance. Utilize this app to bridge the gap between IEC101 serial and IEC104 IP communication protocols, enhancing your network's capabilities.

Downloads:

Protocol_IEC_101-104_Application_Note_20231026.pdf | 619 KB

Protocol MODBUS-RTU2TCP

Categories:Protocol Conversion
Version:1.3.1
Release date:
16.02.2024
Description:

The Protocol MODBUS-RTU2TCP Router App offers an essential bridge between Modbus RTU and TCP communication protocols. This app efficiently converts Modbus RTU messages into TCP format while providing a convenient caching mechanism to store them in external Flash memory. This ensures seamless communication between devices using different Modbus protocols, enhancing data transfer reliability and network efficiency. By simplifying protocol conversion and enabling data caching, this app streamlines communication, making it an invaluable tool for optimizing your network's performance.

Downloads:

Protocol_Modbus_RTU2TCP_Application_note_20231026.pdf | 2 MB

Protocol MODBUS-RTUMAP

Categories:Protocol Conversion
Version:1.2.2
Release date:
06.03.2024
Description:

The Protocol MODBUS-RTUMAP Router App streamlines communication by converting Modbus RTU serial protocol data from multiple Modbus slaves and mapping it to a single Modbus TCP connection. This powerful app simplifies complex data integration tasks, allowing seamless communication across various Modbus devices. By consolidating data from multiple sources into one TCP connection, it enhances efficiency and network performance. Simplify your Modbus data management and ensure reliable communication with this essential app for your router.

Downloads:

rtuMap.v3.tgz | 20 KB V3

rtuMap.v4.tgz | 20 KB V4

rtuMap.v2i.tgz | 20 KB V2i

rtuMap.v4i.tgz | 20 KB V4i

Protocol_Modbus_RTUMAP_Application_note_20231026.pdf | 573 KB

Protocol MODBUS-TCP2RTU

Categories:Protocol Conversion
Version:1.11.1
Release date:
16.02.2024
Description:

The Protocol MODBUS-TCP2RTU Router App facilitates versatile communication by converting Modbus RTU serial protocol to Modbus TCP, while also enabling the router's I/O to function as a Modbus slave device. This app offers a seamless bridge between Modbus RTU and TCP, making data exchange effortless. It empowers your router to participate as a Modbus slave, enhancing its capabilities and compatibility within Modbus networks. Simplify your Modbus communication and harness the full potential of your router with this indispensable app.

Downloads:

Protocol_Modbus_TCP2RTU_Application_note_20240711.pdf | 497 KB

Protocol MODBUS-TCP2RTU for v1

Categories:Protocol Conversion
Version:1.11.1
Release date:
16.12.2024
Description:

The Protocol MODBUS-TCP2RTU Router App facilitates versatile communication by converting Modbus RTU serial protocol to Modbus TCP, while also enabling the router's I/O to function as a Modbus slave device. This app offers a seamless bridge between Modbus RTU and TCP, making data exchange effortless. It empowers your router to participate as a Modbus slave, enhancing its capabilities and compatibility within Modbus networks. Simplify your Modbus communication and harness the full potential of your router with this indispensable app.

Downloads:

tcp2rtu.v1.tgz | 36 KB V1

Protocol_Modbus_TCP2RTU_Application_note_20231026.pdf | 493 KB

Serial over LAN

Categories:Protocol Conversion
Version:4.6.1
Release date:
20.03.2024
Description:

Serial over LAN (SOL) is a mechanism how to work with the serial ports over IP. With this Router App (server side) and a suitable client application you can get a virtual serial port on a computer which mirrors the real serial port on the router. It is possible both to read data from and write data to serial port and it also transfers the control signals. It can uses raw transfers or RFC 2217 Telnet Com Port Control. You can connect with this app to a management console on a infrastructure device or PLC etc.

Downloads:

ser2net.v3.tgz | 226 KB V3

ser2net.v4.tgz | 242 KB V4

ser2net.v2i.tgz | 231 KB V2i

ser2net.v4i.tgz | 242 KB V4i

Serial_over_LAN_Application_Note_20240322.pdf | 434 KB

Serial2TCP

Categories:Protocol Conversion
Version:1.5.0
Release date:
20.03.2024
Description:

Serial to TCP Router App enables communication with a serial port via TCP. User can connect the router serial ports to one or multiple TCP servers and use bidirectional communication. With this app it is possible to collect data from the seriail devices (e.g sensors, PLCs, infrastructure devices) over network and/or send data to them.

Downloads:

serial2tcp.v3.tgz | 20 KB V3

serial2tcp.v4.tgz | 20 KB V4

serial2tcp.v2i.tgz | 21 KB V2i

serial2tcp.v4i.tgz | 20 KB V4i

Serial_to_TCP_Application_Note_20240326.pdf | 482 KB

WoLGateway

Categories:Protocol ConversionTool
Version:1.3.2
Release date:
12.03.2024
Description:

The Wake-on-LAN Gateway app serves as a UDP port listener, capturing incoming communication on the selected UDP port and subsequently forwarding these packets as broadcasts to the appropriate destination address. This functionality enables Wake-on-LAN (WoL) capabilities, allowing you to remotely power on devices connected to the network.

Downloads:

WoLGateway.v3.tgz | 13 KB V3

WoLGateway.v4.tgz | 13 KB V4

WoLGateway.v2i.tgz | 13 KB V2i

WoLGateway.v4i.tgz | 13 KB V4i

WoL_Gateway_Application_Note_20240318.pdf | 459 KB

For firmware version below 6.4.0.



AT Modem Emulator

Categories:Protocol Conversion
Version:1.0.4
Release date:
03.10.2018
Description:

The AT Modem Emulator Router App mimics the behavior of a traditional telephone modem, providing an interface for dial-up connectivity via the router's serial port. When a device is connected to the router's serial interface, it perceives the router as a HAYES-compatible modem and can use standard AT commands to initiate, configure, and terminate a TCP/IP connection. This emulator is capable of establishing connections not only with other instances of the AT Modem Emulator running on separate routers but also with any TCP server listening on the appropriate port. This functionality allows for seamless integration of legacy devices into modern networking environments, making it a valuable tool for both retrofits and new installations.

[Limited to specific router models]

Downloads:

atModemEmulator.v2.tgz | 30 KB V2V2i

atModemEmulator.v3.tgz | 29 KB V3

AT_Modem_Emulator_Application_Note_20231010.pdf | 729 KB

DNP3 Outstation

Categories:Protocol Conversion
Version:1.4.0
Release date:
10.11.2023
Description:

The DNP3 Outstation Router App transforms your router's I/O ports into a DNP3 slave device, enabling it to communicate via the Distributed Network Protocol 3.0 (DNP3). This capability is essential for industries like utilities and energy, where DNP3 is a standard for data acquisition and control. By utilizing this App, you can integrate your router seamlessly into DNP3-based monitoring and control systems. 

Downloads:

dnpOut.v2.tgz | 43 KB V2V2i

dnpOut.v3.tgz | 42 KB V3

dnpOut.v4.tgz | 42 KB V4

DNP3_Outstation_Application_note_20231123.pdf | 2 MB

Modbus logger

Categories:Protocol Conversion
Version:1.1.0
Release date:
19.10.2018
Description:

The Modbus Logger Router App enables the router to interact with Modbus RTU slave devices, reading their data for further processing. Once the data is collected, the app facilitates its secure upload to an FTP or FTPS server for centralized storage and analysis. This provides an essential layer of automation for industrial environments where Modbus RTU slave devices are prevalent. The Modbus Logger ensures seamless data integration and offers a straightforward solution for remote monitoring and control of Modbus-enabled devices.

Downloads:

modbus_logger.v2.tgz | 22 KB V2V2i

modbus_logger.v3.tgz | 22 KB V3

Modbus_Logger_Application_Note_20231020.pdf | 506 KB

Modbus to LwM2M

Categories:Protocol Conversion
Version:1.0.7
Release date:
28.08.2020
Description:

The Modbus to LwM2M Router App serves as a communication bridge between Modbus/TCP devices and devices utilizing the LwM2M (Lightweight Machine-to-Machine) protocol. By translating and routing data between these two commonly used industrial protocols, this app allows for seamless integration and data exchange within your network. Whether you're aiming to modernize your existing Modbus infrastructure or create a hybrid network environment, the Modbus to LwM2M Router App provides a reliable and streamlined solution for ensuring device interoperability and data cohesiveness.

Downloads:

ModbusToLwM2M.v2.tgz | 300 KB V2V3V2i

Modbus_to_LwM2M_Application_Note_20231013.pdf | 498 KB

Modbus to MQTT

Categories:Protocol Conversion
Version:2.0.20
Release date:
30.08.2023
Description:

The Modbus to MQTT Router App enables effortless communication between devices using the Modbus/TCP protocol and those employing MQTT (Message Queuing Telemetry Transport). This app serves as a translator between the two protocols, facilitating real-time data exchange and interoperability. Ideal for both modern IoT applications and traditional industrial setups, the Modbus to MQTT Router App ensures that you can integrate diverse devices into a unified, efficient system without compatibility issues.

Downloads:

mb2mqtt.v2-2.0.20-20230830T015302Z.tgz | 1016 KB V2V3V4V2i

Modbus-MQTT_Application_Note_20231013.pdf | 688 KB

Packet Splitter

Categories:Protocol Conversion
Version:1.3.0
Release date:
01.10.2020
Description:

The Packet Splitter Router App enables data duplication and distribution to multiple targets, supporting up to seven different connections simultaneously. This functionality is useful for real-time data sharing across various endpoints, such as servers or other network devices. By replicating incoming data packets based on predefined settings, the App improves data efficiency, redundancy, and fault tolerance within your network. It is ideal for monitoring systems, backup processes, or multi-tiered analytics platforms.

Downloads:

packetSplitter.v2.tgz | 20 KB V2V2i

packetSplitter.v3.tgz | 19 KB V3

packetSplitter.v4.tgz | 20 KB V4

Packet_Splitter_Application_note_20231024.pdf | 615 KB

Protocol ALPHA-MODBUS

Categories:Protocol Conversion
Version:1.4.1
Release date:
27.09.2018
Description:

The Protocol ALPHA-MODBUS Router App serves as a data converter that enables seamless translation from Mitsubishi ALPHA2 protocols to Modbus TCP. This app is an essential tool for integrating Mitsubishi ALPHA2 devices into a Modbus-centric network architecture. It aims to simplify the process of protocol conversion, offering a hassle-free experience for both setup and operation. Utilize this app to bridge the gap between different industrial communication protocols effectively.

Downloads:

alpha.v2.tgz | 38 KB V2V2i

alpha.v3.tgz | 38 KB V3

ALPHA-MODBUS_application_note_20231024.pdf | 485 KB

Protocol DF1-Ethernet

Categories:Protocol Conversion
Version:1.1.1
Release date:
27.09.2018
Description:

The Protocol DF1-Ethernet Router App simplifies communication by converting the DF1 serial protocol into TCP/IP, enabling seamless integration of DF1-based devices into modern network infrastructures. This straightforward app streamlines the transition from serial communication to Ethernet-based connections. Its user-friendly operation and configuration make it an essential tool for optimizing network compatibility and performance. Use this app to efficiently bridge the gap between DF1 serial and TCP/IP communication protocols, ensuring reliable and efficient data transfer.

Downloads:

abcsp2df1.v2.tgz | 38 KB V2V2i

abcsp2df1.v3.tgz | 38 KB V3

Protocol_DF1-Ethernet_Application_note_20231026.pdf | 541 KB

Protocol IEC101-104

Categories:Protocol Conversion
Version:1.2.3
Release date:
04.09.2023
Description:

The Protocol IEC101-104 Router App simplifies communication by converting the IEC101 serial protocol to the IEC104 IP protocol, facilitating seamless integration of IEC101-based devices into IP-based network infrastructures. This app streamlines the transition from serial communication to IP-based connections, offering a user-friendly interface for configuration and operation. It ensures reliable and efficient data transfer, making it an essential tool for optimizing network compatibility and performance. Utilize this app to bridge the gap between IEC101 serial and IEC104 IP communication protocols, enhancing your network's capabilities.

Downloads:

iec14.v2.tgz | 43 KB V2V2i

iec14.v3.tgz | 42 KB V3

iec14.v4.tgz | 42 KB V4

Protocol_IEC_101-104_Application_Note_20231026.pdf | 619 KB

Protocol MODBUS-RTU2TCP

Categories:Protocol Conversion
Version:1.1.1
Release date:
27.09.2018
Description:

The Protocol MODBUS-RTU2TCP Router App offers an essential bridge between Modbus RTU and TCP communication protocols. This app efficiently converts Modbus RTU messages into TCP format while providing a convenient caching mechanism to store them in external Flash memory. This ensures seamless communication between devices using different Modbus protocols, enhancing data transfer reliability and network efficiency. By simplifying protocol conversion and enabling data caching, this app streamlines communication, making it an invaluable tool for optimizing your network's performance.

Downloads:

rtu2tcp.v2.tgz | 20 KB V2V2i

rtu2tcp.v3.tgz | 19 KB V3

Protocol_Modbus_RTU2TCP_Application_note_20231026.pdf | 2 MB

Protocol MODBUS-RTUMAP

Categories:Protocol Conversion
Version:1.0.4
Release date:
15.01.2020
Description:

The Protocol MODBUS-RTUMAP Router App streamlines communication by converting Modbus RTU serial protocol data from multiple Modbus slaves and mapping it to a single Modbus TCP connection. This powerful app simplifies complex data integration tasks, allowing seamless communication across various Modbus devices. By consolidating data from multiple sources into one TCP connection, it enhances efficiency and network performance. Simplify your Modbus data management and ensure reliable communication with this essential app for your router.

Downloads:

rtuMap.v2.tgz | 19 KB V2V2i

rtuMap.v3.tgz | 18 KB V3

Protocol_Modbus_RTUMAP_Application_note_20231026.pdf | 573 KB

Protocol MODBUS-TCP2RTU

Categories:Protocol Conversion
Version:1.11.0
Release date:
09.06.2023
Description:

The Protocol MODBUS-TCP2RTU Router App facilitates versatile communication by converting Modbus RTU serial protocol to Modbus TCP, while also enabling the router's I/O to function as a Modbus slave device. This app offers a seamless bridge between Modbus RTU and TCP, making data exchange effortless. It empowers your router to participate as a Modbus slave, enhancing its capabilities and compatibility within Modbus networks. Simplify your Modbus communication and harness the full potential of your router with this indispensable app.

Downloads:

tcp2rtu.v2.tgz | 36 KB V2V2i

tcp2rtu.v3.tgz | 35 KB V3

tcp2rtu.v4.tgz | 31 KB V4

Protocol_Modbus_TCP2RTU_Application_note_20231026.pdf | 493 KB

Serial to network proxy (ser2net)

Categories:Protocol Conversion
Version:1.0.6
Release date:
27.09.2018
Description:

Serial over LAN (SOL) is a mechanism how to work with the serial ports over IP. With this Router App (server side) and a suitable client application you can get a virtual serial port on a computer which mirrors the real serial port on the router. It is possible both to read data from and write data to serial port and it also transfers the control signals. It can uses raw transfers or RFC 2217 Telnet Com Port Control. You can connect with this app to a management console on a infrastructure device or PLC etc.

Downloads:

ser2net.v2.tgz | 51 KB V2V2i

ser2net.v3.tgz | 51 KB V3

Serial_to_network_proxy_Application_Note_20231027.pdf | 427 KB

Serial2TCP

Categories:Protocol Conversion
Version:1.2.1
Release date:
27.09.2018
Description:

Serial to TCP Router App enables communication with a serial port via TCP. User can connect the router serial ports to one or multiple TCP servers and use bidirectional communication. With this app it is possible to collect data from the seriail devices (e.g sensors, PLCs, infrastructure devices) over network and/or send data to them.

Downloads:

serial2tcp.v2.tgz | 20 KB V2V2i

serial2tcp.v3.tgz | 19 KB V3

Serial2TCP_Application_Note_20231027.pdf | 547 KB

WoLGateway

Categories:Protocol ConversionTool
Version:1.1.1
Release date:
27.09.2018
Description:

The Wake-on-LAN Gateway app serves as a UDP port listener, capturing incoming communication on the selected UDP port and subsequently forwarding these packets as broadcasts to the appropriate destination address. This functionality enables Wake-on-LAN (WoL) capabilities, allowing you to remotely power on devices connected to the network.

Downloads:

WoLGateway.v2.tgz | 12 KB V2V2i

WoLGateway.v3.tgz | 12 KB V3

WoL_Gateway_Application_Note_20231027.pdf | 458 KB