v6.2.5 (2020-06-13)
* First released version

v6.2.6 (2020-09-11)
* Added support of WiFi
* Added description field for each FW and NAT rule
* Enabled support of VRF Lite in Linux kernel
* Enabled support of UNIX98 pseudoterminals
* Changed default APN for PLMN 24007 to "4g.tele2.se"
* Changed default APN for PLMN 45403 to "mobile.three.com.hk"
* Changed default APN for PLMN 42501 and MSIN 9320xxxxxx to "wbdata"
* Improved reading speed from NOR flash memory
* Fixed rare issue when restarting SNMP service
* Upgraded program dnsmasq to version 2.82

v6.2.7 (2020-12-17)
* Added support of Short GI to WiFi AP configuration
* Added support of Hardware UUID
* Added programs "port1" and "port2" for controlling expansion ports
* Added logging of user authentication failure when accessing the web interface
* Improved identification of router type in the web interface
* Improved permission checking when executing commands like "status"
* Enabled support of POSIX message queues in Linux kernel
* Fixed importing encrypted key from file
* Fixed resetting memories and other components during reboot
* Fixed CVE-2020-25705 in Linux kernel
* Upgraded library OpenSSL to version 1.1.1i
* Upgraded program OpenVPN to version 2.4.10
* Upgraded pam_tacplus plugin to version 1.6.1

v6.2.8 (2021-02-19)
* Added support of Fibocom NL668 modules
* Added support of Unitac ML620 modules
* Added support of Telit LM960 modules
* Added support of TPM 2.0 chip ST33HTPH
* Added support of tls-crypt mode to OpenVPN configuration
* Added support of setting local IP address to GRE configuration
* Added ability to restrict HTTPS to TLS 1.3
* Added program ebtables
* Added program doas as a replacement for program sudo
* Enabled automatic reboot when all memory is exhausted
* Enabled authoritative mode of DHCP server for WiFi clients
* Fixed several issues in WiFi driver including CVE-2020-36158
* Fixed resolving of IP address in OpenVPN
* Fixed possible reflected XSS attack
* Upgraded library OpenSSL to version 1.1.1j
* Upgraded program curl to version 7.74.0
* Upgraded program dnsmasq to version 2.84

v6.2.9 (2021-04-07)
* Added support of Cinterion PLS83 modules
* Added detailed information about the signal to mobile network status
* Added information about frequency band to mobile network status
* Added programs "basename", "cut", "dirname", "printf", "readlink" and "realpath"
* Added JavaScript validation of string inputs
* Changed default APN for PLMN 22603 to "broadband"
* Changed default APN for PLMN 22610 to "net"
* Upgraded library OpenSSL to version 1.1.1k
* Upgraded program curl to version 7.76.0
* Upgraded program ftpd to version 2.0

v6.3.0 (2021-05-07)
* Added support of Multi SSID
* Added support of route-based VPN to IPsec
* Added support of certificate-chain validation in IPsec
* Added support of certificate revocation check to IPsec
* Added support of TPM 2.0 chip to IPsec
* Change output of "status" command to show TAC in case of LTE networks
* Changed module shutdown sequence to prevent "call throttled" errors
* Changed remote syslog to use standard RFC 3164 format
* Downgraded firmware in SD8977 WiFi modules to version 16.68.1.p195
* Upgraded program OpenSSH to version 8.5p1
* Upgraded program OpenVPN to version 2.4.11
* Upgraded program dnsmasq to version 2.85
* Upgraded program strongSwan to version 5.9.2

v6.3.1 (2021-07-21)
* Added support of setting MTU and MRU to PPTP configuration
* Added support of setting MTU and MRU to L2TP configuration
* Added support of ICPlus IP101GA phyters
* Added support of Cinterion PLS83 modules with firmware 01.002
* Increased number of firewall rules from 8 to 16
* Fixed checking IPsec SA for multiple tunnels with same IDs
* Fixed WiFi interface statistics
* Fixed CVE-2020-24586 in Linux kernel
* Fixed CVE-2020-24587 in Linux kernel
* Fixed CVE-2020-24588 in Linux kernel
* Fixed CVE-2020-26139 in Linux kernel
* Fixed CVE-2020-26147 in Linux kernel
* Fixed CVE-2020-26558 in Linux kernel
* Fixed CVE-2020-36386 in Linux kernel
* Upgraded program dhcp-isc to version 4.1-ESV-R16-P1
* Upgraded program curl to version 7.78.0
* Upgraded program strongSwan to version 5.9.3

v6.3.2 (2021-09-30)
* Added support of SSID isolation
* Added support of Cellient MPL200 modules with firmware MPL200_08_0721
* Added support of ICPlus IP101GR phyter
* Added program "shred"
* Added program "sysctl"
* Added match extension "mark" to ebtables
* Added match extension "addrtype" to iptables
* Added common CA certificates
* Added information about frequency band and signal to SNMP
* Added information about RAM and CPU usage to SNMP
* Enabled SFTP file access logging
* Enabled protection against TCP TIME-WAIT Assassination
* Disabled compression and deprecated ciphers in OpenSSL library
* Improved security of Linux kernel and userspace
* Improved security of HTTP(S)
* Improved security of cookies
* Improved security and interoperability of IPsec
* Fixed setting of Perfect Forward Secrecy in IPsec
* Upgraded library OpenSSL to version 1.1.1l
* Upgraded program curl to version 7.79.1

v6.3.3 (2021-12-13)
* Added support of WireGuard VPN
* Added support of Cisco FlexVPN to IPsec
* Added SINR to mobile network status and SNMP mobile subtree
* Added support of waking up from low power mode by RESET button
* Added waiting for RESET button release before resetting
* Renamed menu item "LAN" to "Ethernet" in web interface
* Enabled permanent displaying Location and Name in web interface
* Changed default TTL for GRE packets to 64
* Fixed remote access issue when using route-based IPsec
* Fixed entering SIM PIN into Unitac ML620 modules
* Fixed possible reflected XSS attack
* Fixed exit code of program "snmptrap"
* Fixed several issues in I2C driver
* Upgraded program BusyBox to version 1.34.1
* Upgraded program OpenSSH to version 8.8p1
* Upgraded program strongSwan to version 5.9.4

v6.3.4 (2022-02-09)
* Added support of two-factor authentication
* Added support of second remote IP address to IPsec configuration
* Added support of second remote IP address to OpenVPN configuration
* Added support of user-defined up/down scripts to IPsec configuration
* Added support of user-defined up/down scripts to OpenVPN configuration
* Added support of passphrase to OpenVPN configuration
* Added support of username and password in OpenVPN X.509 multiclient mode
* Added support of setting MTU to IPsec configuration
* Added support of setting MTU on Ethernet interfaces
* Added support of regenerating SSH key
* Added support of automatic redirect to a welcome page
* Added support of resolving "localhost"
* Added invalidation of other active sessions after password change
* Fixed IPsec malfunction when ID does not match certificate subject
* Fixed backup of IPv6 up/down scripts during firmware update
* Fixed CVE-2021-20322 in Linux kernel
* Fixed CVE-2021-45485 in Linux kernel
* Fixed CVE-2021-45486 in Linux kernel
* Upgraded library libnl to version 3.2.25
* Upgraded program hostapd to version 2.10
* Upgraded program ppp to version 2.4.9
* Upgraded program strongSwan to version 5.9.5
* Upgraded program wpa_supplicant to version 2.10

v6.3.5 (2022-04-20)
* Added support of TAP interface to OpenVPN configuration
* Added support of storing system log to eMMC memory
* Added support of changing device ID for remote logging
* Added USB/IP EVEUSB driver to Linux kernel
* Added program "dd" for copying files
* Renamed User Modules to Router Apps
* Fixed connection to a mobile network in IPv6 mode
* Upgraded library zlib to version 1.2.12
* Upgraded library OpenSSL to version 1.1.1n
* Upgraded program OpenVPN to version 2.4.12
